Electric vehicles may one day be able to recharge while driving down the highway, drawing wireless power directly from plates installed in the road that would make it possible to drive hundreds鈥攊f not thousands鈥攐f miles without having to plug in. While the idea may sound like science fiction, 抖阴短视频 Boulder engineers are working to bring it closer to reality.
鈥淲e鈥檇 like to enable electric vehicles to charge on the go,鈥� said Khurram Afridi, an assistant professor in 抖阴短视频 Boulder鈥檚 Department of Electrical, Computer and Energy Engineering.
Over the last two years, Afridi and his colleagues have developed a proof of concept for wireless power transfer that transfers electrical energy through electric fields at very high frequencies. The ability to send large amounts of energy across greater physical distance to in-motion platforms from low cost charging plates could one day allow the technology to expand beyond small consumer electronics like cell phones and begin powering bigger things like automobiles.
Currently, most electric vehicles can travel between 100 and 250 miles on a single charge, depending on the make and model. But charging stations are still few and far between in much of the country, requiring drivers to be strategic in their travel. That problem could go away with this technology, Afridi said.
鈥淥n a highway, you could have one lane dedicated to charging,鈥� Afridi said, adding that a vehicle could simply travel in that lane when it needed an energy boost and could carry a smaller onboard battery as a result, reducing the overall cost of the vehicle.
The potential applications of wireless power transfer technology are as exciting as they are futuristic, but the questions Afridi is attempting to answer date back far longer than the current technological age.
听
An innovation long in the making
The idea of wireless power transfer has fascinated scientists for over a century. In the 1890s, the inventor Nikola Tesla popularized the idea of sending energy across distance and famously demonstrated the idea in public, lighting up a bulb from across the stage. The idea led Tesla to begin work on a wireless power transmission station in Shoreham, New York that he believed would send electricity through the air, but the project was never completed due to financial difficulties.
The advent of radio revolutionized long distance wireless communication shortly thereafter, but the high-frequency technology to transfer large amounts of electrical energy wirelessly had not been developed yet. Wireless power transfer languished for much of the 20th century. The consumer electronics boom of the late 1990s and early 2000s, however, rekindled interest in the subject once more. Today, some small consumer devices feature wireless power transfer, which allows the object to draw energy while lying on a specially-designed pad that is plugged into an outlet.
Replicating this capability for an automobile in motion is far more difficult, requiring significantly more power to be sent across a greater physical distance from the roadway to the vehicle. A car traveling at highway speeds would not linger on any single charging pad for more than a fraction of a second, so the pads would need to be placed every few meters to provide a continuous charge.
Embracing the challenge
To solve the scale and in-motion problem, Afridi had to think differently about methodology. Charging a smartphone only requires five watts of power. A laptop might need 100 watts. But an electric vehicle in motion requires tens of kilowatts of power, two orders of magnitude higher.
Most wireless power technology research to date has focused on transferring energy through magnetic fields 鈥� the so-called inductive approach. Magnetic fields, at strength levels appropriate for substantial energy transfer, are easier to generate than equivalent electric fields. However, magnetic fields travel in a looping pattern, requiring the use of fragile and lossy ferrites to keep the fields and the energy directed, resulting in an expensive system.
Electrical fields, by contrast, naturally travel in relatively straight lines. Afridi wanted to take advantage of the more directed nature of electric fields for his innovation and substantially reduce the cost of the system.
The challenge of using electric fields for wireless power transfer 鈥� the capacitive approach 鈥� is that the large airgap between the roadway and the electric vehicle results in a very small capacitance through which the energy must be transferred.
鈥淓verybody said that it鈥檚 not possible to transfer that much energy through such a small capacitance,鈥� said Afridi. 鈥淏ut we thought: What if we increase the frequency of the electric fields?鈥�
In his laboratory, Afridi and his students set up metal plates parallel to one another, separated by 12 centimeters. The two bottom plates represent the transmitting plates within the roadway while the two top plates represent the receiving plates inside the vehicle.
When Afridi flips a switch, energy is transmitted from the bottom plates. Instantly, the lightbulb above the top plates lights up鈥攑ower transmission with no wires needed. The device has steadily improved to the point where it can transmit kilowatts of power at megahertz-scale frequencies.
鈥淲hen we broke the thousand-watt barrier by sending energy across the 12-centimeter gap, we were just exhilarated,鈥� Afridi said. 鈥淭here were a lot of high fives that day.鈥�
The commute of the future?
Afridi plans to continue developing the prototype and scale it for potential real-world applications. He has received funds from the Department of Energy鈥檚 ARPA-E division and support from a National Science Foundation CAREER award. A recent seed grant from the Colorado Energy Research Collaboratory, granted to Afridi in partnership with Colorado State University and NREL, will allow him to explore the feasibility and optimization of the in-motion system.
In the near term, Afridi envisions the technology being adapted for warehouse use. Automated warehouse robots and forklifts, for example, could move along areas enabled for wireless power transfer and never need to be plugged in, eliminating downtime and increasing productivity. The technology could also be adapted for use in next-generation transportation projects like the Hyperloop, a proposed system that could take passengers from Los Angeles to San Francisco in 30 minutes.
The advent of an electric highway is still far over the horizon and will inevitably face many hurdles, both technological and societal. But Afridi is optimistic and motivated to overcome them.
鈥淎s a scientist, you feel challenged by things that people tell you are impossible to do,鈥� Afridi said.听
